502 glue is a powerful adhesive that can be used to bond a variety of materials, but it can also be a nuisance if it gets on your skin. If you accidentally get 502 glue on your skin, don't panic. There are a few simple methods that you can use to remove it.

1. Leave it alone. If the glue is on a small area of your skin, you may be able to simply leave it alone and it will peel off naturally within a few days.

2. Use soap and water. If the glue is on a larger area of your skin, you can try using soap and water to remove it. Soak your hands in warm, soapy water for a few minutes and then gently rub the glue away with a soft brush.

3. Use acetone or nail polish remover. Acetone and nail polish remover can dissolve 502 glue, but they can also be irritating to the skin. If you choose to use one of these methods, be sure to apply it to a cotton ball and then rub it over the glue. Avoid getting any acetone or nail polish remover on your skin.

4. Use a pumice stone or other abrasive material. A pumice stone or other abrasive material can be used to gently scrub the glue away. Be careful not to scrub too hard, or you may irritate your skin.

5. Use heat. Heat can soften 502 glue, making it easier to remove. Try running your hands under hot water or using a hair dryer on the low setting. Once the glue is softened, you should be able to rub it off with your fingers or a soft brush.

6. Use oil. Oil can also be used to soften 502 glue. Apply a small amount of oil to the glue and then rub it off with your fingers or a soft brush.

7. Use petroleum jelly. Petroleum jelly can be used to prevent 502 glue from sticking to your skin in the first place. Simply apply a thin layer of petroleum jelly to your hands before using 502 glue.

Once you have removed the glue, be sure to wash your hands thoroughly with soap and water.